Components Parts:  Clamps

T-Bolt Clamp

Heavy-duty Stainless Steel band clamp.

Sizes available:  2.5" or 3"

TTI Part No.

2.5":  CL-TB71S

3.0":  CL-TB79S

U-Bolt Clamp

Heavy-duty zinc plated clamp.

Sizes available:  2.5" or 3"

TTI Part No.

2.5":  CL-UB57HD

3.0":  CL-UB58HD

$5.80 ea.

Components Parts:  Engine Mounts

TTi "Biscuit Style" Engine Mounts

Includes: (7) 10mm x 25mm x 1.5 pitch bolts

 Note: Rubber insulators are not included.

$133 set

TTi "Biscuit Style" Engine Mounts

Includes: (7) 10mm x 25mm x 1.5 pitch bolts

 Note: Rubber insulators are not included.

$133 set

66-72 "B"

57MMBE

70-74 "E"

TTi Spool Mounts

Includes:

(4) Polyurethane insulators

(4) 1/2" SAE flat washers

(2) ¾” O.D. x .120 plated sleeves

(7) 10mm x 25mm x 1.5 pitch bolts

(2)  ½ -13 x 5½” grade 8 bolts w/ lock nuts.

Year/Body Style

TTI Part No.

$250 set

73-74 "B"

Components Parts:  Filter Blocking Plate

Click image for

a detailed view.

TTI Filter Blocking Plate

(1) 4130 steel blocking plate with machined O-ring groves.

(2) Viton O-rings installed into the O-ring groves.

(3) Bolts - 6mm x 1.0 pitch x 16mm long with lock washers.

  Note: Filter block plate must be used in conjunction with a remote mounted oil filter.  Without a filter assembly, the oil flow to the engine will be blocked and will result in engine failure.

TTI Part No.

0200-FBP

Components Parts:  Muffler Hanger Body Brackets

Click image for a detailed view.

OEM Style Muffler Hanger Body Brackets

These brackets are mounted directly to the body panel behind rear seat.  Includes all hardware.

Click on photo to the left for a detailed view.

TTI Part No.

E2530BB-2

Components Parts:  Muffler Hangers

Click image for a detailed view.

Muffler Hangers for `63-`66 A-bodies

These heavy-duty hangers which support the mufflers are located just behind the muffler and are hung from the Muffler Body Bracket.

Click on photo to the left for a detailed view.

TTI Part No.

2.5":  MH-A256366

3.0":  MH-A306366

Click image for a detailed view.

Muffler Hangers for `67-`76 A-bodies

These heavy-duty hangers which support the mufflers are located just behind the muffler and are hung from the Muffler Body Bracket.

Click on photo to the left for a detailed view.

TTI Part No.

2.5":  MH-A25HA

3.0":  MH-A30HA

Click image for a detailed view.

Muffler Hangers for `62-`74 B-bodies

These heavy-duty hangers which support the mufflers are located just behind the muffler and are hung from the Muffler Body Bracket.

Click on photo to the left for a detailed view.

TTI Part No.

2.5":  MH-B25HA

3.0":  MH-B30HA

Click image for a detailed view.

Muffler Hangers for `70-`74 E-bodies

These heavy-duty hangers which support the mufflers are located just behind the muffler and are hung from the Muffler Body Bracket.

Click on photo to the left for a detailed view.

TTI Part No.

2.5":  MH-E25HA

3.0":  MH-E30HA

Muffler Hanger for `65-`73 C-bodies

(Passenger-side)

Mounted above the rear axle housing next to the upper shock absorber mounting bolt.  Some models will use existing bolt holes, others will require drilling (2) 5/16" holes.  5/16" bolts and nuts included. 

TTI Part No.

MH-C253H65

Muffler Hanger for `65-`73 C-bodies

(Drivers-side)

Mounted above the rear axle housing next to the upper shock absorber mounting bolt.  Some models will use existing bolt holes, others will require drilling (2) 5/16" holes.  5/16" bolts and nuts included. 

TTI Part No.

MH-C253H6573

Tab-Style Muffler Hanger

for '65-`73 C-bodies (Passenger side)

Required if your vehicle has a stock muffler hanger bracket attached above the rear-end crossmember.

TTI Part No.

MH-C253H72

Components Parts:  Plug Wench

TTi Plug Wrench

Designed for easier access of tightening and removing spark plugs when running a Brodix B1BS, Koffel's Original B1 or B1BS Sportsman Head.

TTI Part No.

TTIB1BS

 $38.50

Components Parts:  Rubber Vibration Insulators

Rubber Vibration Insulators

Used with TTi C-body & Neon exhaust system hangers.

TTI Part No.

BR92155

 $9.00 ea.

Components Parts:  Slip-Connectors

Slip-Connectors

9" long, 16 gauge aluminized tubing with inlet end swaged and notched.

Includes heavy-duty U-bolt clamps.

Sizes available:  2.5" I.D. or 3" I.D.

Recommended to extend H-pipe or X-pipe when using mufflers shorter than what TTI exhaust systems were designed with.

TTI Part No.

2.5":  SC25

3.0":  SC30

Components Parts:  Tailpipe Hangers

Tailpipe Hanger Receptacles

O.E. style rear side frame rail mount.

• 63-76 "A"-body

• 62-74 "B"-body

• 65-73 "C"-body

TTI Part No.

TPH-AB2530

Tailpipe Hanger Receptacles

O.E. style rear floor pan mount.

• 70-74 "E"-body

TTI Part No.

TPH-E2530

Tailpipe Hanger Receptacles

For applications requiring hangers that bolt to the bottom of the frame rail.

TTI Part No.

TPH-B2530

Components Parts:  Torque Shaft Assembly for Column Shifter

Part #B7174TSA-7 shown.

Click image

for a detailed view.

Torque Shaft Assembly

This TTI designed Torque Shaft Assembly is required if your drivers-side, stock straight torque shaft rod is mounted below the torsion bar, when using some TTI Headers and Exhaust Pipes to stock manifolds.

TTI Part No.

727 Trans:  B7174TSA-7

904 Trans:  B7174TSA-9

C-body:  C6573TSA-7

$41.00

Components Parts:  Z-bar for "A"-body Standard Trans applications

Small Block Z-Bar

A modified Z-bar may be required when running TTI's 340 "Step" Headers in an A-body with Standard Trans.  No modification required to the ball stud bracket.

TTI Part No.

ZB407

$101.00

Big Block Z-Bar

A modified 383/440 Z-bar required when running TTI's 383-440 1-3/4" or 2" Headers in an A-body with Standard Trans.  Your ball stud bracket may also require slight modification in order to clear the modified Z-bar.  Check for proper operation prior to installing the headers.

The ball style Bracket

may require modification.

[ .pdf ]

TTI Part No.

ZB307

$101.00