Exhaust System Component Parts

 

 

Exhaust Parts:    

Exhaust Pipes (Manifold/Head pipes)

Click an image for a larger view.

Cast Iron Manifolds shown for display only.  TTi does not sell exhaust manifolds.

TTi "Exhaust Pipes" are designed to directly bolt-up to specific manifolds for a hassle free installation.  These pipes end-up approximately 2" in front of the transmission crossmember.  You will require our H-pipe or X-pipe assembly to get to your mufflers.  If running TTI Headers are in your future, just take out the "Exhaust Pipes" and install Headers in it's place.  TTi's Headers are supplied with adapters to directly bolt-up to your existing TTi H-pipe or X-pipe.

  • Made from 16 gauge aluminized tubing

  • Mandrel bent

  • 1/2" Heavy-duty flanges

  • 1/16" Exhaust pipe gaskets (if applicable)

  • Hardware supplied

  • Footnotes:  2,  3,  9,  66

Pipe bends differ for each manifold / application.  The right & left casting numbers will be required when ordering.

Casting numbers are usually raised imprints located on the top of the manifolds.

Flat Flange

 

Ball-joint End

 

Manifold casting

number list

[ .pdf ]
Application Exhaust Pipe size / TTI Part No.  
63-66 A-body

2.5":   A25EP6366

 $178 set
  3.0":   A30EP6366 $188 set
67-76 A-body

2.5":   A25EP

 $178 set
  3.0":   A30EP $188 set
62-74 B-body

2.5":   B25EP

 $178 set
  3.0":   B30EP $188 set
65-73 C-body

2.5":   C25EP

 $178 set
  3.0":   C30EP $188 set
70-74 E-body

2.5":   E25EP

 $178 set
  3.0":   E30EP $188 set

 Prices do not include Shipping, Handling or California Sales Tax, if applicable.  Prices subject to change without notice.

 

 
Exhaust Parts:     H-Pipes

Click an image for a larger view.

66-70 B-body

TTi "H" pipes are designed to directly bolt-up to TTi Headers or TTi Exhaust Pipes.  The inlet end of our H-pipes are swedged and notched for hassle free bolt-on installation.  The 2.5" width adjusting crossover tube allows maximum flow of exhaust gases.  

 

  • Made from 16 gauge aluminized tubing

  • Mandrel bent

  • (5) Heavy-duty clamps supplied

  • Footnotes:  1,  8,  9,  61

  

Pipe bends differ for each model.

 

62-65 B-body

 

70-74 E-body with GVOD.

Gear Vendors Overdrive

 

 
Application H-pipe size / TTI Part No.

Overall Length

    
63-66 A-body

2.5":   A25MP6366

     $211 set
  3.0":   A30MP6366     $222 set
67-76 A-body  Clears GVOD

2.5":   A25MP

 52-1/4"   $211 set
  3.0":   A30MP 48-1/2"   $222 set
62-65 B-body

2.5":   B25MP6265

 54-1/2"   $211 set
  3.0":   B30MP6265 54-1/2"   $222 set
66-70 B-body  Clears GVOD

2.5":   B25MP6670

 50-1/2"   $211 set
  3.0":   B30MP6670 47"   $222 set
71-74 B-body

2.5":   B25MP7174

 48"   $211 set
  3.0":   B30MP7174 48"   $222 set
65-73 C-body  Clears GVOD

2.5":   C25MP

     $211 set
  3.0":   C30MP     $222 set
70-74 E-body

2.5":   E25MP

 47-1/4"   $211 set
  3.0":   E30MP 46"   $222 set

Clears GVOD

2.5":   E25GV-MP

 47-1/4"   $211 set

Clears GVOD

 3.0":   E30GV-MP 46"   $222 set

 Prices do not include Shipping, Handling or California Sales Tax, if applicable.  Prices subject to change without notice.

 

 
Exhaust Parts:     X-Pipes

Click an image for a larger view.

64-66 A-body

The TTi "X" pipe crossover design improves power and sound tone compared to the traditional H-pipe design.  Width adjusting slip-connectors are part of the X-pipe design for ease of installation.  X-pipes will mate-up directly up to the TTi Headers or Exhaust Pipes. 

 

  • Made from 16 gauge aluminized tubing

  • Mandrel bent

  • (6) Heavy-duty Stainless Steel Band Clamps supplied

  • Footnotes:  1,  8,  9,  61

  

Pipe bends differ for each model.

 

71-74 B-body

 

 

X-pipes require adjustment and fitting.

Click Here

 

 
Application X-pipe size / TTI Part No.

Overall Length

    
63-66 A-body

2.5":   XA25-MP6366

     $265 set
  3.0":   XA30-MP6366     $279 set
67-76 A-body

2.5":   XA25-MP

 52-1/4"   $265 set
  3.0":   XA30-MP 48-1/2"   $279 set
62-65 B-body

2.5":   XB25-MP6265

 54-1/2"   $265 set
  3.0":   XB30-MP6265 54-1/2"   $279 set
66-70 B-body

2.5":   XB25-MP6670

 50-1/2"   $265 set
  3.0":   XB30-MP6670 47"   $279 set
71-74 B-body

2.5":   XB25-MP7174

 48"   $265 set
  3.0":   XB30-MP7174 48"   $279 set
65-73 C-body

2.5":   N/A

      
  3.0":   N/A      
70-74 E-body

2.5":   XE25-MP

 47-1/4"   $265 set
  3.0":   XE30-MP 46"   $279 set

 Prices do not include Shipping, Handling or California Sales Tax, if applicable.  Prices subject to change without notice.

 

 
Exhaust Parts:     Tailpipes

Click an image for a larger view.

63-66 A-body

The TTi tailpipes are application correct and have hangers welded in place on tailpipes.  Designed as a bolt-on connection for ease of installation.

 

  • Made from 16 gauge aluminized tubing

  • Mandrel bent

  • Includes:  Tailpipe Hanger Receptacles

  • Footnotes:  9

  

 

66-76 A-body

 

62-67 B-body

 

68-70 B-body

 

70-74 E-body Turndowns

 

70-74 E-body Challenger

 

 
Application Tailpipe size / TTI Part No.  

Tailpipe Style
63-66 A-body

2.5":   A25TP6366

 $211 set (View diagram) .pdf
  3.0":   A30TP6366 $222 set
67-69 A-body / BARRACUDA

2.5":   A25TP

 $211 set (View diagram) .pdf
  3.0":   A30TP $222 set
67-76 A-body

2.5":   A25TP

 $211 set (View diagram) .pdf
  3.0":   A30TP $222 set
62 B-body

2.5":   B25TP62

 $211 set (View diagram) .pdf
  3.0":   B30TP62 $222 set
62-65 B-body / WAGON

2.5":   B25TP6265W

 $211 set (View diagram) .pdf
  3.0":   B30TP6265W $222 set
63-65 B-body

2.5":   B25TP6365

 $211 set (View diagram) .pdf
  3.0":   B30TP6365 $222 set
66-67 B-body

2.5":   B25TP6667

 $211 set (View diagram) .pdf
  3.0":   B30TP6667 $222 set
67 B-body / GTX

2.5":   B25TP67GTX

 $211 set (View diagram) .pdf
  3.0":   B30TP67GTX $222 set
68-70 B-body

2.5":   B25TP6870

 $211 set (View diagram) .pdf
  3.0":   B30TP6870 $222 set
71-74 B-body

2.5":   B25TP7174

 $211 set (View diagram) .pdf
  3.0":   B30TP7174 $222 set
65-73 C-body

2.5":   C25TP6573

 $211 set (View diagram) .pdf
  3.0":   C30TP6573 $222 set
65-73 C-body

2.5":   C25TP6573W

 $211 set (View diagram) .pdf
  3.0":   C30TP6573W $222 set
70-74 E-body / CHALLENGER

2.5":   E25TP-CHA

 $211 set (View diagram) .pdf
  3.0":   E30TP-CHA $222 set
70-74 E-body / CUDA

2.5":   E25TP-CU

 $211 set (View diagram) .pdf
  3.0":   E30TP-CU $222 set
70-74 E-body / Turndowns

2.5":   E25TP-TD

 $211 set (View diagram) .pdf
For models withoutcut-outs for dual exhaust. 3.0":   E30TP-TD $222 set

 

 Prices do not include Shipping, Handling or California Sales Tax, if applicable.  Prices subject to change without notice.

 

Tube Technologies, Inc.

TTI Performance Exhaust & Headers

1555 Consumer Circle ●  Corona, CA 92880

(951) 371-4878 ●  Fax: (951) 371-6143

Designed and Maintained By:  Tube Tech Inc.

2009 Tube Technologies, Inc.  All rights reserved.

Updated: October 14, 2009