2-1/8" Step Headers

2-1/8" Raised-Deck "Step" Headers

Recommended for 600+ horsepower

Our Headers are constructed of 16 gauge mild steel tubing, mandrel bent on sophisticated computer controlled bending machines for precise fit and uninterrupted exhaust flow. The mandrel bending process maintains a constant inside diameter of the tube for a smoother finish with no restriction of flow and no crimping of the tubes.

2" O.D. primary tubes / steps up to 2-1/8" secondary tubes / merged into 3.5" collectors
3/8" thick laser-cut header and collector flanges, contoured for a leak free fit
"Step" design provides low-end response and top-end horsepower gain
Above the steering center link design (under chassis) offers maximum header to ground clearance
Full length header design for proven power gains
One piece header tubes / No slip tubes
Header Sets Include: 1/16" Header & Collector Gaskets, Header Bolts (12pcs) and Reducers/Adapters for hook-up to your Exhaust System.
Fits Applications:
- 1967-1976 "A"-bodies Tubular K-frame, Coil Over Suspension
- 1962-1974 "B"-bodies
- 1970-1974 "E"-bodies

440 Raised-Deck 2-1/8" "Step" Headers		Footnotes (Click on number to open footnote)
Engine Sizes	440 RB-engine only	37, 39
Cylinder Heads	Brodix B1BS, Koffel's Original B1 or B1BS Sportsman	14, 49
Front End	A-bodies: Tubular K-frame, Coilover Suspension only B & E-bodies: Stock or Tubular K-frame, Coil Over Suspension	33, 38, 60
Auto Trans	Yes	23, 36
Standard Trans	Yes	53
Floor Shift	Yes	23
Column Shift	No	41
Push Button	Yes
Power Steering	Yes
Manual Steering	Yes
Air Conditioning	Yes
Starters	Must use a listed starter	10, 27
Spark Plugs / Wires	NGk spark plugs / Accel 9000 wires	25
Flywheel / Bellhousing	10.5" or 11"	27, 28
Steering Linkage	OEM only	12, 33
Clutch Linkage	OEM only	22
Oil Filters	OEM
Oil Pans	OEM or Milodon	11
Valve Covers	Cast Aluminum

Coating Options / Header Part No's:

"Raw" (Bare Mild Steel

$671

Footnote: C0

Part # TTI440BR-218C0

Nickel Chrome Plated

$691

Footnotes: 17, C1

Part # TTI440BR-218C1

Ceramic Coated

with a Thermal Barrier

$841

Footnotes: 17, C4

Part # TTI440BR-218C4

Polished Ceramic Coated

with a Thermal Barrier

$870

Footnotes: 17, C5

Part # TTI440BR-218C5

Prices do not include Shipping, Handling or California Sales Tax, if applicable. Prices subject to change without notice.

Click an image for a detailed view.

LH view

RH view

Header Adapter kit

Footnote: 16

TTI Header Gasket

Plug Wrench

Part #TTIB1BS

$38.50

(.PDF)

Doug Duell / Evansville Chrysler

1964 Plymouth Drag'n Wagon

Additional Options:

Tubes and Fittings can be installed prior to coating. These orders will be considered "Special Orders". Please Note: TTI requires a $100 non-refundable deposit for all "Special Orders" prior to the start of your order. The balance will be due upon completion of your order. Please allow 2-3 weeks additional time for coating process.

O2 Sensor Fittings

Oxygen Sensors
18mm threads
Steel
Part #MISC-O2
$38 / Fittings + Installation (LH&RH)

Evac Tubes

Mr. Gasket Crankcase Evacuation System
(2) Chrome plated push-on valve cover breathers
Breather grommets
Check valves
3-1/2'' long threaded tubes
Part # KIT-EV6002
$102 / Kit + Installation

EGT Probe Fitting

Exhaust Gas Temperature fittings
1/8" pipe / Internal thread
When ordering, specify which cylinders you want fitting installed on.
Part # MISC-EGT
$17 / Each fitting + Installation

Tube Technologies, Inc.

TTI Performance Exhaust & Headers

1555 Consumer Circle ● Corona, CA 92880

(951) 371-4878 ● Fax: (951) 371-6143

Designed and Maintained By: Tube Tech Inc.

Updated: August 23, 2010