6.1L Hemi Headers
Generation 3 Hemi Crate Engines
TTI's 6.1L Hemi Crate Headers are constructed of 16 gauge mild steel tubing, mandrel bent on sophisticated computer controlled bending machines for precise fit and uninterrupted exhaust flow. The mandrel bending process maintains a constant inside diameter of the tube for a smoother finish with no restriction of flow and no crimping of the tubes.
1-3/4" O.D. tubes / merged into 3" collectors
3/8" thick laser-cut header and collector flanges, contoured for a leak free fit
Above the steering center link design (under chassis) offers maximum header to ground clearance
Full length header design for proven power gains
One piece header tubes / No slip tubes
Header Sets Include: 1/16" Header & Collector Gaskets, Header Bolts (16pcs) and Reducers/Adapters for hook-up to your Exhaust System.
Fits Applications:
1967-1976 "A"-bodies
1962-1974 "B"-bodies
1970-1974 "E"-bodies
|
6.1L Hemi Headers |
Click on number to open footnote |
|||
| Engine Sizes |
6.1L Hemi Crate |
32 | ||
| Cylinder Heads |
OEM only |
|||
| Front Ends |
See correct part number listed below for specific application. 1. Stock or Tubular K-frame with torsion bars. 2. Magnumforce or RMS Tubular K-frame, coil-over suspensions. |
33, 68 | ||
| Auto / Standard Trans |
|
23, 53 | ||
| Floor Shift | Yes | 23 | ||
| Column Shift | No | |||
| Power Steering | A-bodies = No / B&E-bodies = Yes | |||
| Manual Steering | Yes | |||
| Air Conditioning | Modification required | 67 | ||
| Starters | Specific starters required depending on application combination | 54, 10 | ||
| Flywheel / Bellhousing | 10.5" or 11" | 54 | ||
| Steering Linkage | OEM only | 12, 33 | ||
| Clutch Linkage | Hydraulic clutch recommended | 22 | ||
| Oil Filters | OEM or Remote Mount | 56 | ||
| Oil Pans | Mid sump | 47 | ||
|
Coating Options Header Part No's |
Ceramic Coated with a Thermal Barrier $718 Footnote: C4 |
Polished Ceramic Coated with a Thermal Barrier $748 Footnote: C5 |
||
| 1. |
STOCK Front-end or Tubular K-frame with torsion bars... |
Part # TTI6.1HC-C4 | Part # TTI6.1HC-C5 | 17, 69 |
| 2. |
Magnumforce or RMS AlterKtion, Coil-over suspensions only... |
Part # TTI6.1HCA-C4 |
Part # TTI6.1HCA-C5 |
17 |
Prices
do not include Shipping, Handling or California Sales Tax, if applicable. Prices subject to change without notice.
|
LH view |
RH view |
Header Reducers/Adapters |
TTI Header Gasket |
Click an image for a detailed view.
|
Component Parts |
|
|
TTi "Biscuit Style" Engine Mounts Includes: (7) 10mm x 25mm x 1.5 pitch bolts
|
Year/Body Style | TTI Part No. |
$133 set |
||||||||
| 67-72 "A" | 57MMA | |||||||||||
|
|
||||||||||||
|
|
TTi "Biscuit Style" Engine Mounts Includes: (7) 10mm x 25mm x 1.5 pitch bolts
|
Year/Body Style | TTI Part No. |
$133 set |
||||||||
|
66-72 "B" |
57MMBE |
|||||||||||
|
70-74 "E" |
||||||||||||
|
||||||||||||
|
|
TTi Spool Mounts Includes: (4) Polyurethane insulators (4) 1/2" SAE flat washers (2) ¾” O.D. x .120 plated sleeves (7) 10mm x 25mm x 1.5 pitch bolts (2) ½ -13 x 5½” grade 8 bolts w/ lock nuts. |
Year/Body Style |
TTI Part No. |
$250 set |
||||||||
| 73-76 "A" | 57SMA73 | |||||||||||
|
73-74 "B" |
57SMB73 | |||||||||||
|
Click image for a detailed view. |
TTI Filter Blocking Plate (1) 4130 steel blocking plate with machined O-ring groves. (2) Viton O-rings installed into the O-ring groves. (3) Bolts - 6mm x 1.0 pitch x 16mm long with lock washers.
|
TTI Part No. 0200-FBP |
$68.00 ea. |
|
|||
|
Tube Technologies, Inc. TTI Performance Exhaust & Headers 1555 Consumer Circle ● Corona, CA 92880 (951) 371-4878 ● Fax: (951) 371-6143 |
Designed and Maintained By: Tube Tech Inc. 2009 Tube Technologies, Inc. All rights reserved. Updated: June 24, 2010 |
Header is designed to fit transmissions
with the starter on the Drivers-side only.
Note: Rubber insulators are not included.
